MW Battery Charger 40A
Άνευ ΦΠΑ: 331,60€
MW Battery Charger 40A
| Features : |
|
|
MODEL |
PB-600-12 |
PB-600-24 |
PB-600-48 |
|
|
OUTPUT |
BOOST CHARGE VOLTAGE |
14.4V |
28.8V |
57.6V |
|
FLOAT CHARGE VOLTAGE |
13.8V |
27.6V |
55.2V |
|
|
RECOMMENDED BATTERY CAPACITY(AMP HOURS)(Note 3) |
135 ~ 400AH |
70 ~ 210AH |
35 ~ 105AH |
|
|
BATTERY TYPE |
Open & Sealed Lead Acid |
|||
|
OUTPUT CURRENT |
40A |
21A |
10.5A |
|
|
INPUT |
VOLTAGE RANGE |
90 ~ 264VAC 127 ~ 370VDC |
||
|
FREQUENCY RANGE |
47 ~ 63Hz |
|||
|
POWER FACTOR (Typ.) |
0.95/230VAC 0.98/115VAC at full load |
|||
|
EFFICIENCY (Typ.) |
86% |
87% |
89% |
|
|
AC CURRENT (Typ.) |
6.8A/115VAC 3.4A/230VAC |
|||
|
INRUSH CURRENT (Typ.) |
25A/115VAC 50A/230VAC |
|||
|
LEAKAGE CURRENT |
<3.5mA / 240VAC |
|||
|
PROTECTION |
OVER VOLTAGE |
16 ~ 18V |
32 ~ 35V |
64.5 ~ 69.5V |
|
Protection type : Shut down o/p voltage, re-power on to recover |
||||
|
OVER TEMPERATURE |
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down |
|||
|
FUNCTION |
REMOTE CONTROL |
Open: Normal work Short: Stop Charging |
||
|
LEAKAGE CURRENT FROM BATTERY (Typ.) |
1mA |
|||
|
FAST CHARGE |
2 / 3 / 8 stage selectable |
|||
|
CHARGING OK |
Relay contact (RY15) |
|||
|
OUTPUT OK |
Relay contact (RY13) |
|||
|
TEMPERATURE SENSE |
By NTC |
|||
|
ENVIRONMENT |
WORKING TEMP. |
-20 ~ (Refer to "Derating Curve") |
||
|
WORKING HUMIDITY |
20 ~ 90% RH non-condensing |
|||
|
STORAGE TEMP., HUMIDITY |
-40 ~ , 10 ~ 95% RH |
|||
|
TEMP. COEFFICIENT |
0.05%/ (0 ~ ) |
|||
|
VIBRATION |
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
|||
|
SAFETY & EMC (Note 2) |
SAFETY STANDARDS |
UL1012, TUV EN60335-1, EN60335-2-29 (except for 48V), EN60950-1(48V only) approved |
||
|
WITHSTAND VOLTAGE |
I/P-O/P:3KVAC I/P-FG:1.8KVAC O/P-FG:0.5KVAC |
|||
|
ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / / 70% RH |
|||
|
EMC EMISSION |
Compliance to EN55022 (CISPR22), EN61000-3-2,-3 |
|||
|
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024; light industry level, criteria A |
|||
|
OTHERS |
MTBF |
135.6Khrs min. MIL-HDBK-217F ) |
||
|
DIMENSION |
230*158*67mm(L*W*H) |
|||
|
PACKING |
2.2Kg; 6pcs/14.2Kg/1.76CUFT |
|||
|
NOTE |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and of ambient temperature. 2. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 3. This is Mean Well's suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation. 4. Please choose the "3 stage" selection when the charger is used to charge the batteries and power the loads in the same time. |
|||
Γράψτε μια κριτική
Το Όνομά σας:Η Κριτική σας: Σημείωση: δε μεταφράζεται η HTML!
Βαθμολογία: Κακή Καλή
Εισάγετε τον κωδικό στο παρακάτω πλαίσιο:
