The OPTO-4 is particularly suited to 'noisy' or commercial environments, as it provides a complete solution for system builders who require all components to be shielded. As it is port-powered (from the PC), the OPTO-4 is quick and trouble-free to install.
The unique Actisense design integrates an over-moulded case for excellent water resistance and a small footprint to ease installation into tight spaces.
| Electrical | |
|---|---|
| NMEA Listener/Input Isolation | 2kV Opto-Isolation between Red/Black NMEA pair and all other connections |
|
NMEA Listener/Input Voltage |
+/-15V Continuous Maximum +/-35V Max <1 Second |
| NMEA Listener/Input Signal Thresholds |
Logic '0' +2V to +15V Logic '1' -15V to 0V |
| NMEA Talker/Output Voltage & Current |
Dependant on Host RS232 Interface. Typically +/-5V to +/-15V @10mA Max |
| RS232 Voltage on Host | +/-7V to +/-15V |
| RS232 Port Total Current Consumption | 2mA to 5mA depending on RS232 Voltage |
| Speed/Baud Rate | 4800 to 115200 Baud |
| Mechanical | |
| Housing Material | PVC Black |
| Thumb Screw Material | PVC Orange |
| Screw | Steel, Nickle Plated, M2.8 Thread |
| DB9 Connector | 9 Pin Female |
| Cable Length | 1.5m |
| Cable Wire | 22AWG (17/34AWG) Tinned Stranded Copper |
| Cable Jacket | PVC |
| Shield | Internal Copper Foil Shield |
| Cable Outer Diameter | 5.5mm |
| Approvals and Certifications | |
| Operating Temperature | -20°C to +70°C |
| Electrical Specification | Meets IEC 61162-2 |
| Weight | 100g |
| Guarantee | 3 Years |
| UL Certification | Cable E137250 |
| RoHs Compliant | |
