Quark-Elec QK-A034
Άνευ ΦΠΑ: 192,74€
Quark-Elec QK-A034
Connects NMEA 0183 and Raymarine SeaTalk1 sensors and/or equipment to a NMEA 2000 chart plotter.
- Combines up to 3 NMEA inputs with a SeaTalk1 data input
- Converts the combined data to NMEA 2000 for your chart plotter. (1-way conversion)
- WiFi, USB and NMEA 2000 output
- Filtering un-necessary NMEA 0183 sentences
The QK-A034 converter connects NMEA 0183 and Raymarine SeaTalk1 sensors and equipment to a NMEA 2000 chart plotter.
The internal NMEA 0183 multiplexer combines data from three NMEA 0183 inputs with SeaTalk data input.
It outputs the combined messages to WiFi, USB and a NMEA 2000 output port.\
The A034 can be used out of the box for standard functionality or configured for additional sophistication.
The QK-A034 gives you:
- Combined data from 3 x NMEA 0813 and SeaTalk1.
- Convenient viewing of your combined marine data over WiFi on your mobile phones, tablet and laptop and to your NMEA 2000 chart plotter
- Filtering options.
The internal SeaTalk converter allows the A034 to listen on the SeaTalk bus and convert SeaTalk data to NMEA messages.
Typical System Configuration
Without Configuration: The multiplexer converts and combines data received on the listener ports and sends this data to NMEA 2000, WiFi and USB simultaneously.
Default Baud rates: NMEA input 1 and 2: 4800bps and NMEA input 3: 38400bps
With Configuration:
Filtering options: Each input has a flexible filter that can be configured to pass or block specific sentences. This frees up bandwidth, significantly reducing the possibility of data overflow and loss of data.
WiFi: Up to 4 devices can connect directly to the A034 with no need for an access point. Through Configuration, the A034 can be connected to a wireless access point, allowing for additional users and further range.
.
WiFi Connection
The WiFi module is set for direct Ad-hoc WiFi connection as default, with no need for a router. The SSID and password can be changed through QK-A034 configuration software, increasing security and memorability. Up to 4 wireless devices can connect directly to the A034 in Ad-hoc mode.
QK-A034 can also be connected via Station mode using the Configuration software. This allows for greater range and remote access, as well as additional multi-device access.
The WiFi can also be disabled and be placed on Standby mode if desired.
Features
- Multiplexes up to three NMEA 0183 input devices with one SeaTalk input
- Galvanically isolated NMEA and SeaTalk input ports. (also called opto-isolation. Galvanically isolation prevents unwanted currents between devices, preventing equipment damage and interference with radio signals)
- Multiple outputs: WiFi, USB and NMEA 2000
- SeaTalk to NMEA converter (converts common SeaTalk1 data types to 0183 sentences)
- NMEA 0183 to NMEA 2000 converter (converts common sentences to PGNs)
- WiFi: Ad-hoc mode allows up to 4 devices to connect to the internal WiFi module simultaneously
- WiFi: Station mode allows for the connection of the A034 to your router/ access point for greater number of wireless users and WiFi range.
- WiFi: Standby option
- WiFi and USB output of combined data in NMEA 0183 sentence format
- WiFi and USB additionally output NMEA 2000 network PGNs (in both 0183 sentence and PCDIN format)
- Compatible with Windows, Mac, Linux
- Compatible with Android and iOS via WiFi, excluding Configuration. (Configuration must be completed using Windows software.)
- Filtering allows for overflow reduction and additional configuration.
Γράψτε μια κριτική
Το Όνομά σας:Η Κριτική σας: Σημείωση: δε μεταφράζεται η HTML!
Βαθμολογία: Κακή Καλή
Εισάγετε τον κωδικό στο παρακάτω πλαίσιο:
